Organize your tools and supplies with a DIY drill dock organizer. You can make this simple organizer from scrap wood by drilling two-inch holes and installing it on a flat surface. Power drills can also be stored in a DIY drill dock organizer. All you need is wood and PVC pipe to create the organizer. You can also make a DIY caulk tube storage organizer. These are just some of the many home shop ideas that will keep your tools and supplies organized and accessible.
DIY caulk tube storage organizer
A DIY caulk tube storage organizer can easily keep caulk tubes organized and out of sight. To create a caulk storage organizer:
- Start by drilling two holes on one end of a two-inch PVC pipe.
- Mount the pipe horizontally on the side of the shelf.
- Insert the caulk tubes into the holder, sliding them into place.
A DIY caulk tube storage organizer can keep partially-used tubes sealed and handy. The boxes can be filled with duct tape, which can be pushed through an extra piece. Another solution is to hang the lines from the pegboard. This way, they’ll stay in place until they’re needed.
This caulk tube storage organizer is an excellent solution if you have a work van or trailer. It uses two-inch and three-inch PVC pipes with beveled ends that screw into a backer. It can store up to 80 tubes of caulk. The tubes are then sealed with the right-sized PVC caps.
Floors for a workshop
One of the most important things when choosing floors for a home workshop is how solid they will be. You don’t want a bed that flexes under the weight of heavy machinery. For this reason, you should choose the thickest rubber available. In addition, you should select a floor resistant to dents and scrapes.
The ideal flooring for a home workshop should be safe, easy to clean, and relatively inexpensive. Luckily, several options fit each criterion. In addition to being affordable, the best workshop floors can also be attractive. One of the best options is a utility or rustic-grade unfinished wood flooring. These materials are strong enough to withstand high-impact environments.
Another option is horse stall mats. These are dense and durable and come in three-by-six-inch pieces. You can cut these into smaller pieces to create work areas. You can also use these on concrete work surfaces. You can quickly move them around when working on something. For an even better option, you can use a combination of horse stall mats and concrete work surfaces.
The flooring choice for a home workshop depends on the room’s purpose. Choosing a material that is easy to clean and durable is also an important consideration. For example, you can choose a durable material like PU/PVR or a durable synthetic material like PVC.
When choosing a concrete floor, you should choose one that is stain-resistant. It is not damaged by prolonged water submersion and can be easily sealed. However, it would help if you remembered that different types of coatings could make the floor slippery when wet. In addition, concrete floors are hard-wearing and scratch-proof. They will stand up to high-impact activities and withstand the heat of an underfloor heating system.
Vinyl flooring is another good option. It is waterproof and can be purchased in many colors and designs. This option is also affordable. The downside is that you must clean and remove grease or oils from the floor before applying an epoxy coating. If you choose a vinyl floor, you should remember that it’s more challenging to maintain than other materials.
Natural stone is another option you can use. There are several varieties of natural stone available. Among them are marble, granite, limestone, and travertine. These are durable but must be resealed every five to ten years. In addition, they can be cold underfoot. Underfloor heating will help combat this issue.
Tool storage ideas
One way to keep your work surface clear is to store tools vertically. You can make a PVC tool rack by cutting a 1-in. wide notch in two-in.-diameter PVC pipes. Then, use a hacksaw or miter saw to cut three-1/2-in. Sections. Then, drill one-half-inch holes and attach each paragraph to a 2×4 with drywall screws.
Another way to organize your tools is to purchase a storage bag with multiple pockets. The bag should be waterproof so that your devices won’t rust. You can even get one made of fabric. There are also roll-up tool bags that come with five compartments. They’re convenient to use and lightweight.
Another way to organize small tools is to create a toolbox out of foam sheets. This helps you find the right tool more easily. You can also use foam sheets to make DIY wrenches, sockets, screwdrivers, and pliers organizers. These organizers make the best use of space and keep tools close together. They can be laid out in a line or like a puzzle to make it easier to find what you need.
Pegboards are also a great way to store tools. They’re the gold standard and are great for small spaces. Plus, pegboards can be bought in small sections and expanded later. They can hold lighter items, but heavier tools will likely require metal pegboards. Pegboards also don’t stick out, so you won’t have to worry about someone banging their head on them!
To get organized, you’ll need to take inventory of your tools. Then, sort them into categories. Then, use zone storage to keep items together. For example, you can designate a storage area for your table saw tools in a DIY cabinet. Make sure to hang the cabinet near the table saw.
If you have a lot of power tools, invest in a storage space with multiple drawers and cabinets. Having your tools neatly organized will improve your workflow and save your sanity. Another great way to keep your devices neat is to attach shelves to drawer slides. This will make it easy to pull out your tools and put them away.
Foam tool kits are another excellent option for tool storage. They come in various sizes and are a great option for large and small tools. These foam kits are typically more cost-effective than drawer liners and can fit several drawers. Also, you may be able to use leftover foam.
When you find your tools, you may want to use colorful foam to label them. These can help you identify them quickly and easily. Alternatively, you can attach small labels to the outside of the tool storage cabinet.
